The 3M Belt is the 3.00 mm pitch member of the HTD (High Torque Drive) curvilinear synchronous belt family. It transmits power by tooth engagement with the pulley, so there is no slip, no speed drift and no need for lubrication.

With its ultra-compact 3 mm tooth spacing, 3M is the go-to choice for micro drives where space is at a premium. Transmission efficiency reaches 98% or more, the speed ratio extends to 1:10, and the allowed line speed reaches 45 m/s.

MOQ: 200 pcs, standard widths: 6 / 9 / 12 / 15 mm. Other widths available on request.

• Medical devices: infusion pumps, diagnostic equipment, surgical robots.
• Robotics: micro joints, grippers, compact actuator drives.
• Office equipment: printers, scanners, copiers, label makers.
• Consumer electronics: camera lenses, smart home devices, small appliances.
• Automation: miniature conveyors, pick-and-place modules, micro linear stages.
• eplacement drives: direct swap on existing HTD 3M pulley systems.
  

On a 3M drive, width sets the load capacity. Pick the narrowest width that handles peak torque, then match pitch length to your center distance.

• 6 mm – office equipment, small robotics
• 9 mm – medical devices, compact automation
• 12 mm – light industrial mini-drives
• 15 mm – heavier micro-industrial applications

1. Inspect on receipt: surface clean, belt not twisted, teeth full and well formed.
2. Never bend or crimp — this damages the glass fiber tensile member.
3. Avoid scratches and chemicals; keep away from strong oxidising acids; limit long oil/water contact.
4. Release tension before removal. Never pry the belt off under high tension with improvised tools.
5. Check pulley alignment: pulleys must be parallel and coplanar.
6. Tension just enough to prevent tooth jump at maximum load.
7. Keep the drive clean; replace at first sign of tooth wear, cracking or cord exposure.